FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1103 Fixed Dome Network Camera Release date: 2010-04-23 Release type: Production Firmware version: 5.08.1 File name: M1103_5_08_1.bin Preceding release: 5.08 AMC version: 5.6.2.11-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.08.1 ============== Added features ============== Corrected problems ================== 5.08.1: C01 Adjusted sensor data timing setup. At certain temperatures the sensor data came out of sync resulting in distorted images. Known limitations ================= 5.08.1:L01 If the status LED is set to flash when a video stream is accessed, the flashing stops after an AVHS dispatch. The flashing begins again if a new stream is accessed (e.g. if the live view is reloaded). 5.08.1:L02 Streaming of MJPEG over rtsp sometimes does not work for resolutions higher than 1024x768 in windows media player and mplayer. Workaround: Use VLC instead http://www.videolan.org/. 5.08.1:L03 Multicast for ipv6 will only work if ipv4 is enabled. 5.08.1:L04 When the camera is streaming to many clients simultaneously for a long time, clients have dropped off AMC. Workaround: Use automatic re-connect in AMC. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version3 is supported by AXIS M1103. The following groups are supported by M1103. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Group Exceptions ===== ========== General Image and Video Video status Motion Detection IP filter PTZ PTZ driver update PTZ administation Set PTZ parameters PTZ control queue Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'customexposurewindow' ImageSource.I#.Sensor 'event' Event 'ftpaction' Event.E#.Actions 'ftp_config' EventServers.FTP 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'httpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'hwaction' Event.E#.Actions 'motion' Motion 'position' PTZ.Preset.P0.Position 'ptzaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcpaction' Event.E#.Actions 'tcp_config' Eventservers.TCP 'tour' GuardTour.G#.Tour Supported AXIS VAPIX API Image Resolutions for M1103/M1113 Resolution Exceptions ========== ========== 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 192x144 1) 176x120 1) 1) Not visible in web user interface