FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS P1344/P1344-E Network Camera

Release date:      2011-03-18

Release type:      Production

Firmware version:  5.22

File name:         P1343_5_22.bin

Preceding release: 5.20

AMC version:       5.9.9.0-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.22
============


Modifications
=============

5.22:M01 Parameter root.PTZ.ImageSource.I0.PTZEnabled is default set to false.

Improvements since 5.20
=========================

5.22:I01 SMTP notifications will now set the correct "from"-address when
         sending messages.

5.22:I02 Timestamps in RTP packets should now be set correctly.

Known limitations
=================

5.22:L01 When removing view areas, the name will be remembered and reused when
         creating new view areas.

5.22:L02 Specific PTZ preset does not trigger an event. Use Any Position as
         trigger instead.

5.22:L03 Problem downloading recordings if you fetch 15 or more at the same
         time.

5.22:L04 Generating crash report can take long time. Wait for download to
         finish.

5.22:L05 Recordings made with an earlier firmware will not be readable on the
         SD Card from a 5.20 firmware. Backup important recordings and
         reformat the SD Card after firmware upgrade

5.22:L06 After first registration of the camera to http://www.axiscam.net, some
         critical errors can be seen in the log and LED will flash, however
         the updates are working fine. Accessing the camera using axiscam name
         will get an white image. Workaround: refresh page.

5.22:L07 Removing and reinserting SD card during recording is not
         recommendable.

5.22:L08 Having a very large number of records (more then 15000) made in a
         single shot, the last page of the recording list cannot be accessed.
         Workaround: Restart the camera.

5.22:L09 Daylight saving time does not work for Iran.

5.22:L10 With audio enabled, the initial connection latency is increased.

5.22:L11 Remote back focus operation will be disabled when the temperature
         is too low. Information will be shown in system log.

5.22:L12 Due to limitation in the drivers, when selecting 16:9 or 16:10 the
         top and bottom are cropped to fit the aspect ratio in the View Area page.

5.22:L13 A large amount of simultaneous uploads might cause a warning message
         in kernel log.

5.22:L14 Will always show PTZ-controls in ACS even if PTZ isn't enabled.

5.22:L15 Factory default or upgrading of the P1344-E camera with flash_all 
	 option will set image rotation to 0. Configure rotation to 180 degrees 
	 for correct image orientation.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the AXIS
P1344/P1344-E.

The following groups are supported by the AXIS P1344/P1344-E. For more
information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group                 Exceptions
=====                 ==========
General
Image and Video
Motion Detection
I/O
IP filter
Audio
PTZ                   PTZ driver update
                      PTZ administration
                      Set PTZ parameters
                      PTZ control queue

Built in templates for dynamic parameters are:

Template              Group
========              =====
'button'              PTZ.Auxiliary.A1.Button
'daynightaction'      Event.E#.Actions
'event'               Event
'ftp_config'          EventServers.FTP
'ftpaction'           Event.E#.Actions
'guardtour'           GuardTour
'guardtouraction'     Event.E#.Actions
'http_config'         EventServers.HTTP
'httpaction'          Event.E#.Actions
'motion'              Motion
'ptzaction'           Event.E#.Actions
'hwaction'            Event.E#.Actions
'recordaction'        Event.E#.Actions
'smtpaction'          Event.E#.Actions
'tcp_config'          Eventservers.TCP
'tcpaction'           Event.E#.Actions
'tour'                GuardTour.G#.Tour
'streamprofile'       StreamProfile

Supported AXIS VAPIX API Image Resolutions for AXIS P1344/AXIS P1344-E

Resolution  Exceptions
==========  ==========

1280x800
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1440x900    1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface