FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS A8004-VE

Release date:             2018-04-23

Release type:             Production

Firmware version:         1.65.2

File name:                A8004_1_65_2.bin

Preceding release:        1.65.1.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.

New features in 1.65.2
======================

1.65.2:F1
Stability improvement

1.65.2:F2
Added TerminateCall function in Action Rules

1.65.2:F3
Added support for Polycom phones

1.65.2:F4
Added Emergency Recovery for apache webserver. The product is restarting
automatically when the web-interface is not reachable within 3-4 minutes.



Corrections in 1.65.2 since 1.65.1.1
=================================

1.65.2:C01
Corrected critical vulnerability ACV-128401.

1.65.2:C02
Corrected a issue that let the camera become unresponsive in rare occasions when
connected to an AVHS system.

1.65.2:C03
Corrected an issue when an ONVIF client connected to the camera via digest
authentication.



Known Bugs/Limitations
======================

1.65.2:L1
It's recommended to factory default the unit before making a downgrade if
needed.

1.65.2:L2
When using mp3 files with other samplerates than the native 16kHz
performance might suffer and delays be introduced.

1.65.2:L3
As action rules holds copies of recipient information independentally of the
Recipient configuration, it is possible to call a SIP recipient using an action
rule despite the recipient is removed in the Recipent configuration.

To prevent this, one must remove the recipient from the action rule too.

1.65.2:L4
It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at
the same time.

This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also
be avoided by using Asterisk to transcode into RFC 2976.

1.65.2:L5
Denied access does not show in access log (System Options>Support>Logs and
Reports>Access Log)

1.65.2:L6
When the device is facing up or down, tilt tampering detection fuctionality does
not work optimally and may generate to events oftern even though the device is
not moved or tilted.
(The gravity does not effect the two axis normally used for the tilt detection
making it sensitive to noise)





Supported AXIS VAPIX API Image Resolutions for AXIS A8004-VE
============================================================

Resolution  Exceptions
==========  ==========

1280x960
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1400x1050   1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface