NEW SOFTWARE RELEASE
                         ====================


 Products involved: Axis 560
		    
 Release date:      Apr 24, 2003

 Release type:      Production Release

 Software version:  6.16

 File size:         Axis 560		1 181 666 bytes

 Last preceding
 release:           6.15.1


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates 
 and support at

 http://www.axis.com


 Management Tool
 ===============

 AXIS ThinWizard is a web-based management tool that provides a 
 network overview with efficient drill-down possibilities for 
 printing management and troubleshooting. It can set IP addresses,
 discover and group print servers, install new firmware and configure
 multiple Axis products concurrently. AXIS ThinWizard is available 
 for free at http://www.axis.com.


---------------------------------------------------------------------

 Limitations in version 6.16
 ===========================
   
 Axis OfficeBasic does not support NetWare nor AppleTalk.
 The Etrax 100 specific correction does not apply to Axis 540+.
 No reverse data will be obtained when printing on the APS ports.

 Added features in version 6.16
 ================================

 In Netware networks, using Q-mode over IPX, support for walk-the-tree
 is added. Now the Print Server resolves the name of the que-volume
 even if the volume resides on a file server without any replica in the
 NDS tree.
 


 Corrected problems in version 6.16
 ==================================

 The problem of using arp/ping to set a static ip-address when dhcp is
 enabled is resolved.

 The dhcp-option domain-name is corrected, the domain name parameter is
 updated.

 Etrax 100 specific correction:
 The Bitronics negotiation routines are improved. Reverse data reading 
 is improved for several printer models, e.g. Ricoh AP 2600N and 
 Ricoh 1018. Printer connectivity is improved, situations which earlier 
 resulted in connection loss is now resolved, e.g. problems where it seems
 that the printer is stuck in sleep mode, is now resolved without the 
 need to restarting the print server. 

 The "Processing Job"-error is corrected. On certain printers, this
 problem occured as intermittent messages showing Processing Job
 on the printer display. This error might also interrupt printing. 

 Known problems in version 6.16
 ==============================

 HP WebJetadmin is neither tested nor supported with this release.
 AXIS ThinWizard is recommended instead.

 Succesful paralell-port "flash-loading" might require two, or more
 attempts in some cases.

 Support for Checksums in Netware is not implemented.

 Reverse data from the APS ports is disabled. 

 Users are recommended to use the native print monitor on Win2000/XP.