1(1) NEW SOFTWARE RELEASE ==================== Product involved: AXIS NDPS Gateway Configuration Utility Release date: 2003 Nov 03 Release type: PRODUCTION Software version: 1.3 -------------------------------------------------------------------- Release description: 1. The AXIS NDPS Gateway Configuration Utility is a snap-in for NWAdmin that helps users install Axis print servers as NDPS printers in a NetWare NDS environment. -------------------------------------------------------------------- System Requirements: -------------------------------------------------------------------- Installation: 1. Logon to a NetWare Server as an Administrator 2. Run setup.exe and follow the on-screen instructions -------------------------------------------------------------------- Using AXIS NDPS Gateway Configuration Utility: 1. Always set the HP JetAdmin Support parameter for the print server to AUTO or ON; this allows the utility to discover the print servers on the network using IP & IPX, and turns on the MIBs necessary for NDPS printing. The HP Jetadmin Support parameter is located under Admin | This Print Server | General Settings. Note: in some print server models and firmware, the HP JetAdmin parameter has been renamed to NDPS Printing Protocol and moved to Admin | Network Settings | Detialed view | NetWare | NDPS Printing Protocol. This parameter should not be set on Disabled. Choose between TCP_AND_SPX, TCP_ONLY and SPX_ONLY. 2. Print servers with firmware older than 6.10 are unable to perform NDPS printing over IP with Axis NDPS Gateway. -------------------------------------------------------------------- Files: Rel_note.txt This file Setup.exe Setup file for the utility that contains - AxisGCfg.pd2 - SLPSrchM.dll - SLPUA.dll - MFC42.dll