NEW SOFTWARE RELEASE
            ====================
                  
                 
Product involved:       AXIS CAPT Print Monitor

Release date:           September 2, 2005

Release type:           Production

Software version:       2.00.0.027

Software media:         Setup file

Last preceding release: 2.00.0.018

---------------------------------------------------------------------

 
Easy Functionality Description:
===============================
AXIS CAPT Print Monitor is a software program for connecting to a 
printer on a TCP/IP network. AXIS CAPT Print Monitor automatically* 
detects a printer on the network, so you can easily connect your 
computer to the network printer to perform peer-to-peer printing. 

*Depends on the installation procedure 

Note 
• Confirm that the TCP/IP protocol is activated on your computer. 
• AXIS CAPT Print Monitor can automatically detect a printer only 
when your computer and the printer are on the same subnet. 




Improvements:
=============
- Changed how the Print Monitor searches for printer objects that are 
  connected to print monitor ports during uninstallation. In some cases, 
  even if the printer objects where deleted by the printer driver 
  uninstallation, the print Monitor would still enumerate these printer 
  objects as not deleted and uninstallation would not continue.

- Added a version number in the Add/Remove Programs entry string, i.e.
  changed "AXIS CAPT Print Monitor" to "AXIS CAPT Print Monitor 2.00".

- Fixed problem where the Print Monitor could not detect a disconnected network
  connection for AXIS 1610/1611 print servers.

- Fixed problem for AXIS 1610 print servers, when the printer is powered of
  and a print job is started. Before the fix, the print job was not started
  when the printer was powered on.

- Fixed problem when user pauses a print job to a AXIS 1610 for more than one
  minute.

- Fixed problem: "If In the environment where you've registered more than one 
  printers on a single PC, if you disconnect a connection with one printer 
  while printing to another one, it stops with showing "Printing".

- Fixed problem with error message "The TCP/IP protocol is not available. 
  Install or configure the TCP/IP protocol from the network control panel.", 
  which is displayed when e.g. adding a new port.

  
  
Limitations:
===========
* NetBIOS/NetBEUI communication is no longer supported. Installed printers
  using NetBIOS/NetBEUI are automatically converted to use TCP/IP communication.
* The unicast communicate mode can be used with 1650 print servers (not 1610).

 


Best regards
AXIS COMMUNICATIONS AB