FIRMWARE RELEASE NOTE ======================== Products affected: P1455-LE Release date: 2020-09-28 Release type: Production Firmware version: 10.1.0 Preceding release: 10.0.0 -------------------------------------------------------------------------------- Upgrade recommendations ======================== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks before proceeding. For example if the current version is 7.40 and you want to upgrade to 9.70. Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.70. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or at the firmware portal at https://www.axis.com NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security New features in 10.1.0 ================================================================================ 10.1.0:F1 Added support for using mp3 audio clips. 10.1.0:F2 Added support for certificate-based client authentication in MQTT. 10.1.0:F3 Added support for Remote Syslog API which enables Axis devices to send their log messages to a remote syslog server. Remote Syslog can be configured via web- interface under Settings -> System -> TCP/IP or using the VAPIX API that can be found here -> https://www.axis.com/vapix-library/. 10.1.0:F4 A factory default is now mandatory when trying to downgrade the device. 10.1.0:F5 Reduced time to built-up an RTSP video stream by 30% and more. 10.1.0:F6 Added support for dynamic power allocation via Link Layer Discovery Protocol (LLDP) in addition to PoE-class based power allocation. This allows the switch to allocate less power to the camera and potentially a greater number of PoE devices can be connected to the switch. LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE -> LLDP Send Max PoE. 10.1.0:F7 Added VAPIX API for enabling/disabling all privacy masks. 10.1.0:F8 Administrator credentials are now required to access privacymask.cgi. 10.1.0:F9 Added support for average bitrate control (ABR). 10.1.0:F10 Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI. Note that this functionality requires that the product have direct access to the internet. 10.1.0:F11 Added support for a new overlay modifier "%v" that displays seconds in 1/1000 fractions. 10.1.0:F12 Updated Apache to version 2.4.43 to increase overall cyber security level. 10.1.0:F13 The following HTTP headers are now configured per default to increase overall cybersecurity level: X-Frame-Options: SAMEORIGIN X-Content-Type-Options: nosniff X-XSS-Protection: 1; mode=block. 10.1.0:F14 Added support for HTTP2. 10.1.0:F15 Updated OpenSSL to version 1.1.1g to increase overall minimum cyber security level. 10.1.0:F16 Added support for IEEE 802.1x-2010 which provides support for EAPoL version 3. 10.1.0:F17 Changed default IEEE 802.1x EAPoL settting from version 1 to 3. 10.1.0:F18 The EAP-TLS-identity field in the 802.1x configuration is now by default filled with "axis-" value. 10.1.0:F19 Removed the download.cgi API. The exportrecording.cgi API which was introduced in 5.60 is the substitute. Features in 10.0.0 ================================================================================ Corrections in 10.1.0 ================================================================================ 10.1.0:C1 Corrected an issue that prevented cross device triggering to work properly when IPv6 was used. 10.1.0:C2 Corrected an issue that sometimes made it impossible to edit action rules after upgrade. 10.1.0:C3 Corrected an issue that sometimes caused event triggered recordings to fail. Corrections in 10.0.0 ================================================================================ Known Bugs/Limitations ================================================================================ Supported AXIS VAPIX API Image Resolutions for P1455-LE ================================================================================ Resolution Exceptions Capture mode ------------ ------------ -------------- 1920x1080 2) 3) 1280x960 2) 3) 1280x800 2) 3) 1280x720 2) 3) 1024x768 2) 3) 1024x640 2) 3) 800x600 2) 3) 800x500 2) 3) 800x450 2) 3) 640x480 2) 3) 640x400 2) 3) 640x360 2) 3) 480x360 2) 3) 480x300 2) 3) 480x270 2) 3) 320x240 2) 3) 320x200 2) 3) 320x180 2) 3) 240x180 2) 3) 160x120 2) 3) 160x100 2) 3) 160x90 2) 3) 768x576 1) 2) 3) 720x576 1) 2) 3) 704x576 1) 2) 3) 704x480 1) 2) 3) 704x288 1) 2) 3) 704x240 1) 2) 3) 384x288 1) 2) 3) 352x288 1) 2) 3) 352x240 1) 2) 3) 192x144 1) 2) 3) 176x144 1) 2) 3) 176x120 1) 2) 3) 80x50 1) 2) 1) Not visible in web user interface 2) 1920x1080 (16:9) @ 25/30 fps 3) 1920x1080 (16:9) @ 50/60 fps (no WDR)