FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1144 Network Camera Release date: 2012-08-14 Release type: Production Firmware version: 5.40.10.4 File name: M1144_5_40_4.bin Preceding release: M1144_5_40.bin AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Release 5.40.10.4 ================= 5.40.10.4 is the first official production service release for the AXIS M1144 Corrections since 5.40.10 ======================= 5.40.10.4:L31337 Add missing scope for ONVIF streaming profile. 5.40.10.4:L32797 IPV6 fails in Onvif. 5.40.10.4:L34089 IR light settings might be reset when upgrading. 5.40.10.4:L36800 No image when switching profile in live view. 5.40.10.4:L37771 No trigger data for H.264. Features ====================== Known Bugs/Limitations ====================== 5.40.3:L18122 Removing and reinserting SD card during recording is not recommendable. 5.40.3:L24316 Check and repair is only available if the file system is ext4. 5.40.3:L29580 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.3:L28435 It's not possible to download recordings bigger than 4GB from the system. 5.40.3:L27901 Using modifiers like %c in a network share upload event does not work. 5.40.3:L26145 Moving a view area doesn't always work as expected. 5.40.3:L27653 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.10:L31556 Event recipient listincorrectly displayed in IE7 5.40.10:L34090 DSCP value for Event/Alarm over IPv4 is always 0 5.40.10:L34091 Changing DSCP values might prompt for password 5.40.10:L35447 Activating IR illumination buttons can impair liveview performance. 5.40.10:L35825 Zoom bar is disabled until using zoom buttons 5.40.10:L35026 Number of different configured video streams are limited by hardware. 5.40.10:L44176 The JPEG images with a rsolution which is not a multiple of 16/8 (width/height) will be truncated to the nearest value. For example if you request an image with 800x450 resolution then you will get 800x448. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'motion' Motion 'nsdevice' NetworkShare 'position' PTZ.Preset.P#.Position 'ptzaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'user_ctlqueue' PTZ.UserCtlQueue Supported AXIS VAPIX API Image Resolutions for AXIS M1144. Resolution Exceptions ========== ========== 1280x800 1280x720 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 352x240 1024x768 1) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface