FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M1144-L Network Camera Release date: 2013-10-31 Release type: Production Firmware version: 5.40.10.7 File name: M1144_5_40_10_7.bin Preceding release: M1144_5_40_10_6.bin AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Improvements in 5.40.10.7 since 5.40.10.6 ========================================= 5.40.10.7:I01 AVHS 2.20 compliant firmware. 5.40.10.7:I02 Parameter videomaxbitrate is not ignored in VBR anymore. 5.40.10.7:I03 Improved AxisNS stability. 5.40.10.7:I04 ONVIF stability fixes. 5.40.10.7:I05 Button for removing users doesn't disappear anymore. 5.40.10.7:I06 Solved time zone issues for Moscow and Israel. 5.40.10.7:I07 Solved framerate issues when converting events. 5.40.10.7:I08 Improvement in handling large NTP time differences with the server. Known Bugs/Limitations ====================== 5.40.10.7:L01 Removing and reinserting SD card during recording is not recommendable. 5.40.10.7:L02 Check and repair is only available if the file system is ext4. 5.40.10.7:L03 A combination of a high bandwidth continuous recording and a lot of small recordings can result in disc full. The automatic clean up will stop at that point and the user has to manually remove recordings. 5.40.10.7:L04 It's not possible to download recordings bigger than 4GB from the system. 5.40.10.7:L05 Using modifiers like %c in a network share upload event does not work. 5.40.10.7:L06 Moving a view area doesn't always work as expected. 5.40.10.7:L07 Event recipient list incorrectly displayed in IE7. 5.40.10.7:L08 Multiple simultaneous recordings to SD cards and network shares can degrade the performance of the system. 5.40.10.7:L09 DSCP value for Event/Alarm over IPv4 is always 0. 5.40.10.7:L10 Changing DSCP values might prompt for password. 5.40.10.7:L11 Activating IR illumination buttons can impair liveview performance. 5.40.10.7:L12 Zoom bar is disabled until using zoom buttons. 5.40.10.7:L13 Number of different configured video streams are limited by hardware. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'motion' Motion 'nsdevice' NetworkShare 'position' PTZ.Preset.P#.Position 'ptzaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'streamcache' StreamCache 'streamprofile' StreamProfile 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'user_ctlqueue' PTZ.UserCtlQueue Supported AXIS VAPIX API Image Resolutions for AXIS M1144-L. Resolution Exceptions ========== ========== 1280x800 1280x720 1024x640 800x600 640x480 640x400 640x360 480x360 352x240 320x240 1440x900 1) 1024x768 1) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface