FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M5013 PTZ Dome Network Camera AXIS M5014 PTZ Dome Network Camera Release date: 2013-03-12 Release type: Production Firmware version: 5.40.11.2 File name: M5013_5_40_11_2.bin Preceding release: 5.40.11.1 AMC version: 6.0.6.7-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. New Features ============ Corrections in 5.40.11.2 since 5.40.11.1 ======================================== 5.40.11.2:C01 Motor voltage disabled when motors are not running. Known Bugs/Limitations ====================== 5.40.11.2:L01 Pan and tilt operations are not available when using the T8412 Installation Display. 5.40.11.2:L02 Expired or not yet valid client certificates will be uploaded successfully instead of being rejected. 5.40.11.2:L03 Playing a continuous recording for which the oldest parts are currently removed by automatic disk cleanup, will not show a correct start/stop time. 5.40.11.2:L04 When playing a continuous recording, the from and start time is not respected. 5.40.11.2:L05 If a customer is trying to upload a very large file instead of a valid language file, a "404 page cannot be displayed" page is shown. 5.40.11.2:L06 Color parameter when pulling RTSP stream with color=0 doesn't have effect. 5.40.11.2:L07 Frame Size Control does not affect the size of the snapshot taken with the upper right control that can be added to the Live View. 5.40.11.2:L08 Events triggered at the same time, will by default settings share the same filename. This may result in upload of corrupted image. 5.40.11.2:L09 Constant bit rate might fluctuate more than 10%. 5.40.11.2:L10 Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.40.11.2:L11 It is recommended to unmount the SD Card before ejecting it. 5.40.11.2:L12 Recordings made on the SD Card with firmware version earlier than 5.20 will not be readable from the 5.40 firmware. Backup important recordings and reformat the SD Card after firmware upgrade. 5.40.11.2:L13 Check and repair is only available if the file system is ext4. 5.40.11.2:L14 When using action rule resulting in short recordings, it is recommended to extend post-event time. 5.40.11.2:L15 Date modifiers "%m-%d-%Y" are not formatted correctly when used with folder name, SMTP subject and message. 5.40.11.2:L16 Audio alarm sometimes not disabled during PTZ movements. 5.40.11.2:L17 It's possible to se crosshair and to use emulated joystick with javaclient. 5.40.11.2:L18 Info about emulated Joystick in live view help pages. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by AXIS M5013/M5014. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Supported AXIS VAPIX API Image Resolutions for AXIS M5013/M5014. Resolution Exceptions ========== ========== 1280x720 2) 800x600 800x450 640x480 640x360 480x360 480x270 320x240 320x180 1440x900 1) 2) 1024x768 1) 2) 1024x640 1) 2) 800x500 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 640x400 1) 480x300 1) 384x288 1) 352x288 1) 352x240 1) 320x200 1) 240x180 1) 240x135 1) 192x144 1) 176x144 1) 176x120 1) 160x120 1) 160x100 1) 160x90 1) 80x50 1) 1) Not visible in web user interface 2) Only available for M5014