Video Source Configuration

Parameter Description Range
Device ID This is the address of the connected device. Since the Sony EVI units operates in a daisy-chain configuration the first unit in the chain will have Device ID 1, the second unit will have Device ID 2 and so on. 1-7
Device Type Select which type of device that is used. "EVI-G20/G21",
"EVI-D30/D31",
"EVI-D100/D100P",
"EVI-D70/D70P"

Driver Specific Settings

Parameter Description Range
Flip pan If set to true, relative pan operations will be inverted true, false
Flip tilt If set to true, relative tilt operations will be inverted true, false
Enable digital zoom If set to false, digital zoom will never be used.
Only EVI-D100/D100P and EVI-D70/D70P support digital zoom.		 true, false

Mechanical limits

Movement Limits Minimal value Maximal value Comment
Left -30 30 Limits for EVI-G20/G21.
Right -30 30
Up -15 15
Down -15 15
Left -100 100 Limits for EVI-D30/D31 and
EVI-D100/D100P.
Right -100 100
Up -25 25
Down -25 25
Left -170 170 Limits for EVI-D70/D70P (when mounted upside down, see notes below).
Right -170 170
Up -30 90
Down -30 90
Zoom Limits      
Zoom wide 1 9999 Limits for EVI-G20/G21 and EVI-D30/D31.
Zoom tele 1 9999
Zoom wide 1 19999 Limits for EVI-D70/D70P and EVI-D100/D100P.
The digital zoom range is 10000-19999.
Zoom tele 1 19999
Focus Limits      
Focus near 1 9999  
Focus far 1 9999
Optical Data      
Min field angle 1 1000 Degrees. Min field angel is at max optical zoom.
Max field angle 1 1000

The optical data limits are used to tune image centering:
  1. Zoom out completely and adjust Max Field Angle until the spot you click becomes centered accurately.
  2. Disable digital zoom (EVI-D100/D100P and EVI-D70/D70P only) and zoom in completely and repeat for Min Field Angle.
  3. For EVI-D100/D100P and EVI-D70/D70P enable digital zoom and zoom in completely and repeat for Min field angle, digital zoom.
Light Control

Parameter Description Range
IR cut filter Set to on to enable the infrared cut filter.
Only supported by EVI-D70/D70P.		 on, off, auto
Back light compensation Set to true to use the back light compensation.
Not supported by EVI-G20/G21.		 true, false

Extended Driver Specific Settings

Parameter Description Range
Move Speed Set the default speed to use for pan, tilt and zoom movements. 1-100
Block auxiliary commands If true, the auxiliary command support for the device is disabled.
Auxiliary commands may interfere with the drivers device control.		 true, false
Min field angle for digital zoom 1/10 degrees (i.e. a value of 15 represents an angle of 1.5 degrees).
See Mechanical Limits above.
Only EVI-D100/D100P and EVI-D70/D70P support digital zoom.		 1-1000