PTZ DRIVER RELEASE NOTES ======================== Release date: 2011-06-28 Release type: Production Driver version: 4.06 Filename: Videmech-4.06-mipsisa32r2el-3_36-4_1.ptz Previous release: none --------------------------------------------------------------------- Release 4.06 ============= This is the first release of this driver. Known problems and limitations in version 4.06 ============================================== Note! Some limitations are also model dependent and can behave different on different models! 4.06:1 To use this version of the driver, firmware 5.80 or higher is required. 4.06:2 When sending absolute movements all positions have to be updated. This means that if we send a tilt movement when a pan movement is in progress, the pan movement will be stopped. 4.06:3 Focus/Zoom is also sent for all absolute movements, if the attached camera doesn't support either Zoom or Focus the Lens drive has to be inhibited according to the instructions under "Lens Configuration" in the manual. Otherwise the unit will not correctly detect when it has reached the requested position. 4.06:4 The unit seems to have some precisions problems, not returning the same position when queried after a move as it was requested to move to. 4.06:5 Autofocus is not supported. 4.06:6 Iris/Autoiris is not supported