PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2018-04-09

Release type: Production

Firmware version: 1.0

Filename: Siemens-1.0-mipsisa32r2el-3_46-4_1.ptz

---------------------------------------------------------------------

Release 1.0:
=============

1.0:1 This is the first release of a Siemens driver.
      Tested against a Siemens CCDA1435-DNX camera.

Known problems and limitations
==============================
Note! Some limitations are also device type dependent and can behave
      different on different Siemens devices!

L01 To use this version of the driver, firmware 5.50 or higher
    is required.

L02 A manual focus movement may disable auto-focus
    (Siemens device type dependent).

L03 A manual iris movement may disable auto-iris
    (Siemens device type dependent).

L04 The auto-focus or auto-iris command will set both
    auto-focus and auto-iris at the same time. It is not possible
    to set only one of them.

L05 Some Siemens device types may only have a fixed focus setting
    (no focus adjustments possible).

L06 After start, it may take some time before the RS485 serial
    communication will start to work. Some errors or warnings may
    be written in the log-file shortly after the start.