PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2012-10-16

Release type: Production

Firmware version: 4.03

Filename: Eneo-F2-4.03-crisv32-3_0-3_0.ptz

Previous release: none

---------------------------------------------------------------------

Release 4.03:
=============



Known problems and limitations in version 4.03
===========================================================
Note! Some limitations are also device type dependent and can behave
      different on different Eneo devices!

4.03:1 To use this version of the driver, firmware 5.20 or higher
       is required, or for AXIS Q7401 firmware 5.20.2 or higher is required.

4.03:2 The driver can have only one of zoom, focus and iris movements
       running at the same time.

4.03:3 The driver have no "autofocus" and "autoiris" functions.

4.03:4 After a pan, tilt or zoom movement, the "autofocus" function
       will be activated in the PTZ unit.

4.03:5 After a pan or tilt movement (but not after a zoom move),
       the "autoiris" function will be activated in the PTZ unit.

4.03:6 Information about "DOMEID" and pan and tilt positions may be
       included in the picture.

===========================================================