PTZ DRIVER RELEASE NOTES ======================== Release date: 2020-04-21 Release type: Production Firmware version: 4.05 Filename: Kalatel-4.05-mipsisa32r2el-3_46-4_1.ptz --------------------------------------------------------------------- Release 4.05: ============= 4.05:1 Added support for OSD-menu and auxiliary cgi-commands (with some limitations, see below). Known problems and limitations in version 4.05 ============================================== Note! Some limitations are also device type dependent and can behave different on different Kalatel devices! 4.05:2 To use this version of the driver, firmware 5.20 or higher is required, or for AXIS Q7401 firmware 5.20.2 or higher is required. 4.05:3 On some Kalatel devices, when clicking on the iris bar, the iris may toggle between "auto-iris" and fully open iris. 4.05:4 Some auxiliary cgi-commands may be required to navigate inside the OSD-menues. 4.05:5 This ptz-driver use the "Kalatel ASCII Protocol". Many Kalatel ptz-units require a Kalatel Computer-Interface or Data-Converter to use this ptz-driver/ptz-protocol. 4.05:6 If a Kalatel Computer-Interface or Data-Converter is required, verify that the serial interface match the serial interface on the video-encoder.