PTZ DRIVER RELEASE NOTES ======================== Release date: 2020-04-21 Release type: Production Firmware version: 4.03 Filename: Lilin-4.03-mipsisa32r2el-3_46-4_1.ptz --------------------------------------------------------------------- Release 4.03: ============= This is the first release of this driver. Known problems and limitations in version 4.03 ============================================== Note! Some limitations are also device type dependent and can behave different on different Lilin devices! 4.03:1 To use this version of the driver, firmware 5.20 or higher is required, or for AXIS Q7401 firmware 5.20.2 or higher is required. 4.03:2 To set a preset position, a special procedure is required (for more information, check the help page in the driver). 4.03:3 Sometimes pan movements and tilt movements are performed one at a time (not combined to one movement). 4.03:4 An autofocus or an autoiris command will temporary stop any ongoing continuous movements. 4.03:5 An iris command will stop any continuous movements. When the iris command is ready, the continuous movements will continue again. 4.03:6 Autofocus is enabled by zoom requests and disabled by focus requests. 4.03:7 Autoiris is disabled by iris requests.