PTZ DRIVER RELEASE NOTES ======================== Release date: 2020-04-21 Release type: Production Firmware version: 4.09 Filename: Sensormatic-4.09-mipsisa32r2el-3_46-4_1.ptz --------------------------------------------------------------------- Release 4.09: ============= 4.09:1 Added support for simplex communication. A parameter is used to select half duplex or simplex communication. Known problems and limitations ============================== Note! Some limitations are also device type dependent and can behave different on different Sensormatic devices! L01 To use this version of the driver, firmware 5.50 or higher is required. L02 A manual focus movement may disable auto-focus (Sensormatic device type dependent). L03 A manual iris movement may disable auto-iris (Sensormatic device type dependent). L04 The auto-focus or auto-iris command will set both auto-focus and auto-iris at the same time. It is not possible to set only one of them. L05 Some Sensormatic device types may only have a fixed focus setting (no focus adjustments possible). L06 After start, it may take some time before the RS485 serial communication will start to work. Some errors or warnings may be written in the log-file shortly after the start. L07 To use extended presets, an Ultra V unit (running firmware 3.06 or later) or an Ultra VII unit is required.