FIRMWARE RELEASE NOTES ====================== Products affected: AXIS P1344/P1344-E Network Camera Release date: 2011-05-16 Release type: Production Firmware version: 5.22.2 File name: P1344_5_22_2.bin Preceding release: 5.22.1 AMC version: 5.9.9.0-1 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.22.2 ============== Corrections =========== 5.22.2:C01 Stability improvements. Known limitations ================= 5.22.2:L01 When removing view areas, the name will be remembered and reused when creating new view areas. 5.22.2:L02 Specific PTZ preset does not trigger an event. Use Any Position as trigger instead. 5.22.2:L03 Problem downloading recordings if you fetch 15 or more at the same time. 5.22.2:L04 Generating crash report can take long time. Wait for download to finish. 5.22.2:L05 Recordings made with an earlier firmware will not be readable on the SD Card from a 5.20 firmware. Backup important recordings and reformat the SD Card after firmware upgrade 5.22.2:L06 After first registration of the camera to http://www.axiscam.net, some critical errors can be seen in the log and LED will flash, however the updates are working fine. Accessing the camera using axiscam name will get an white image. Workaround: refresh page. 5.22.2:L07 Removing and reinserting SD card during recording is not recommendable. 5.22.2:L08 Having a very large number of records (more then 15000) made in a single shot, the last page of the recording list cannot be accessed. Workaround: Restart the camera. 5.22.2:L09 Daylight saving time does not work for Iran. 5.22.2:L10 With audio enabled, the initial connection latency is increased. 5.22.2:L11 Remote back focus operation will be disabled when the temperature is too low. Information will be shown in system log. 5.22.2:L12 Due to limitation in the drivers, when selecting 16:9 or 16:10 the top and bottom are cropped to fit the aspect ratio in the View Area page. 5.22.2:L13 A large amount of simultaneous uploads might cause a warning message in kernel log. 5.22.2:L14 Will always show PTZ-controls in ACS even if PTZ isn't enabled. 5.22.2:L15 Factory default or upgrading of the P1344-E camera with flash_all option will set image rotation to 0. Configure rotation to 180 degrees for correct image orientation. APPLICATION DEVELOPER Information ================================= The AXIS VAPIX Application Programming Interface is supported by the AXIS P1344/P1344-E. The following groups are supported by the AXIS P1344/P1344-E. For more information, please refer to the AXIS VAPIX HTTP API specification version 3, part of the AXIS VAPIX API, available at www.axis.com. Group Exceptions ===== ========== General Image and Video Motion Detection I/O IP filter Audio PTZ PTZ driver update PTZ administration Set PTZ parameters PTZ control queue Built in templates for dynamic parameters are: Template Group ======== ===== 'button' PTZ.Auxiliary.A1.Button 'daynightaction' Event.E#.Actions 'event' Event 'ftp_config' EventServers.FTP 'ftpaction' Event.E#.Actions 'guardtour' GuardTour 'guardtouraction' Event.E#.Actions 'http_config' EventServers.HTTP 'httpaction' Event.E#.Actions 'motion' Motion 'ptzaction' Event.E#.Actions 'hwaction' Event.E#.Actions 'recordaction' Event.E#.Actions 'smtpaction' Event.E#.Actions 'tcp_config' Eventservers.TCP 'tcpaction' Event.E#.Actions 'tour' GuardTour.G#.Tour 'streamprofile' StreamProfile Supported AXIS VAPIX API Image Resolutions for AXIS P1344/AXIS P1344-E Resolution Exceptions ========== ========== 1280x800 1280x720 1024x768 1024x640 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 1440x900 1) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface