FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS Q3708-PVE

Release date:             2018-12-20

Release type:             Production

Firmware version:         6.55.6

Preceding release:        5.95.4.8

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 6.55.6
================================================================================

6.55.6:F1
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

6.55.6:F2
Corrected behavior for conditional triggers.

6.55.6:F3
Improved handling for networks with small MTU values.

6.55.6:F4
Improved Zipstream using dynamic frame rate.

6.55.6:F5
Support for ONVIF Profile G.


Corrections in 6.55.6
================================================================================

6.55.6:C1
Improvements in session ID handling for rtsp streaming. Useful when streaming in
some video clients.

6.55.6:C2
Disabled the Energy-Efficient Ethernet  mode that caused network connection
issues on rare occasions.

6.55.6:C3
Added ACAP support for NV12 format.

6.55.6:C4
Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture
Parameter Set) in the stream according to ACAP documentation.

6.55.6:C5
Fixed issues with stopped events for manually triggered recording.

6.55.6:C6
Date format now displayed correctly in ACM.

6.55.6:C7
Optimized Network Share polling frequency.

6.55.6:C8
Improved stability in actionengine (tcp notification).


Known Bugs/Limitations
================================================================================

6.55.6:L1
WDR Forensic Capture is only possible when the Exposure control setting is set
to Automatic. Any settings done in non WDR Forensic Capture mode will be
invisible when in WDR Forensic Capture mode.


Supported AXIS VAPIX API Image Resolutions for AXIS Q3708-PVE
================================================================================

Resolution  Exceptions
==========  ==========

2560x1920   3)
2560x1440   2)
1920x1080   2)
1600x1200   3)
1280x960    3)
1280x720    2)
1024x768    3)
800x600     3)
800x450     2)
640x480     3)
640x360     2)
480x360     3)
480x270     2)
320x240     3)

768x576     1) 3)
704x576     1)
704x480     1)
384x288     1) 3)
352x240     1)
176x144     1)
176x120     1)
80x60       1)

1) Not visible in web user interface
2) QHD 2560x1440 (16:9)
3) 5 MP 2560x1920 (4:3)