PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2011-06-28

Release type: Production

Firmware version: 4.08

Filename: Sensormatic-4.08-mipsisa32r2el-3_32-4_0.ptz
Previous release: None

---------------------------------------------------------------------

Release 4.08:
=============

This is the first release of this driver.


Known problems and limitations in version 4.08
==============================================

Note! Some limitations are also device type dependent and can behave
      different on different Sensormatic devices!

4.08:1 To use this version of the driver, firmware 5.50 or higher
       is required.

4.08:2 A manual focus movement may disable auto-focus
       (Sensormatic device type dependent).

4.08:3 A manual iris movement may disable auto-iris
       (Sensormatic device type dependent).

4.08:4 The auto-focus or auto-iris command will set both
       auto-focus and auto-iris at the same time. It is not possible
       to set only one of them.

4.08:5 Some Sensormatic device types may only have a fixed focus setting
       (no focus adjustments possible).

4.08:6 After start, it may take some time before the RS485 serial
       communication will start to work. Some errors or warnings may
       be written in the log-file shortly after the start.

4.08:7 To use extended presets, an Ultra V unit (running firmware 3.06
       or later) or an Ultra VII unit is required.