FIRMWARE RELEASE NOTES ====================== Products affected: AXIS A1001 Release date: 2017-10-23 Release type: Production Firmware version: 1.50.0.3 File name: A1001_1_50_0_3.bin Preceding release: 1.50.0.2 AMC version: None Onvif support: Profile C ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New Features ============ N/A Corrections in 1.50.0.3 since 1.50.0.2 ================================= 1.50.0.3:C01 Corrected critical vulnerability ACV-120444 1.50.0.3:C02 Corrected security vulnerability CVE-2016-2147 & CVE-2016-2148 1.50.0.3:C03 Updated the Portable UPnP SDK to 1.6.22 to increase the overall cyber security level. 1.50.0.3:C04 Compatiable with A9188 R1.10.0.2 Known Bugs/Limitations ====================== 1.50.0.3:L02 Creating an action rule (on the action engine web pages) with additional conditions (e.g. schedule trigger /and/ door monitor open) does not work. 1.50.0.3:L04 After a firmware update, the web browser cache may need to be cleared to avoid seeing pages originating from the old firmware. 1.50.0.3:L05 Specifying an IdPoint timeout value (waiting for PIN to be entered) greater than 10 seconds has no effect. 1.50.0.3:L11 In Entry Manager Date & Time Settings you can only input the IP address of the ntp server, not the DNS name. DNS name of NTP server can be provided by going into Additional Controller Configuration > System Options > TCP/IP > Advanced > NTP Configuration. 1.50.0.3:L12 Changing the Time Zone will not work from ACS and ACM. 1.50.0.3:L14 During start up of the device the web server is reachable earier than in previous FW, before other sub-systems are operational, possibly resulting in AEM showing 'Failed to retrieve device info' on its overview page if accessed during this time. Reloading the page a few seconds later will resolve this issue. 1.50.0.3:L15 When Shared Events is enabled, then action rules with additional conditions does not work and action rules with the schedule set to something other than Always will not work. 1.50.0.3:L17 If you have offline controllers in a controller cluster and try to remove one of the units that is online this requires a majority of all controllers being online excluding the controller being removed. 1.50.0.3:L19 To change the recipient of an Action Rule, please click the "Modify..." button and change there. The drop-down in the Action Rule lists currently does not work. 1.50.0.3:L23 If you have a door configured with a door monitor, the lock button in AEM will not immediately lock the door. It will only set the controller in a locking state. The door lock will be locked once the door monitor indicates that the door is closed. 1.50.0.3:L26 If the device is configured with two locks that are operating under scheduled unlock, the locks will lock after a system reboot even if the schedule states that they should be unlocked. 1.50.0.3:L43 If using a controller cluster and configuring an action rule on one of the devices to trigger on an event sent by another device in the cluster, the action rule will not be triggered.