FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS 8004-VE

Release date:      2015-04-15

Release type:      Production

Firmware version:  5.65.0

File name:         A8004-VE_5_65_0.bin

Preceding release: No Preceding Release(s)

AMC version:       None

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


New Features
============
5.65.0:F1 This product supports extended I/O functionality.
          The product has two relays
          The product has four configurable I/Os

5.65.0:F2 This product supports two-way audio.
          Audio support is enabled per default.
          The audio capabilities include Acoustic Echo Cancellation (AEC) and
          Noise Reduction (NR)

5.65.0:F3 This product supports SIP - Session Initiation Protocol

          One simultaneous call.
          Up to 8 registered SIP Accounts
          Call VAPIX API including CallState events.

          NAT Traversal using:
          STUN
          TURN
          ICE

          * DTMF RFC2833 (RTP)
          * DTMF RFC2976 (SIP INFO)

          Supported codecs (SIP specifically):
          H264
          PCMU
          PCMA
          G726-32
          SPEEX 8kHz
          SPEEX 16kHz
          L16 8kHz
          L16 16kHz

5.65.0:F4 This product supports WDR - Wide Dynamic Range


Corrections in 5.65.0 since No Preceding Release(s)
===================================================

5.65.0:C1 Privacy masks marking will be aligned to the marking regardless of
          capture mode and selected resolution when saving the settings.


Known Bugs/Limitations
======================

5.65.0:L01 If a user enters invalid characters in the Domain name or Registrar
           address text-fields, an error message appears which uses the API
           caption names (PublicDomain or Registrar).

           Registrar is equal to Registrar address.
           PublicDomain is equal to Domain name.

5.65.0:L02 Calls via TCP or TLS does not respond to hangups from the remote peer
           after 33 seconds in some setups. The call can be hung up by pressing
           the call button, sending a axcall:TerminateCall request or restarting
           the device.

           3CX PBXs has been tested and are known to work with TCP.

5.65.0:L03 A8004-VE supports only boolean property events as additional
           conditions.

5.65.0:L04 When making a video-only SIP call, a call is setup but no video is
           shown (and also, obviously, no audio is heard). The call state is set
           to Idle - Terminated.

5.65.0:L05 As action rules holds copies of recipient information independentally
           of the Recipient configuration, it is possible to call a SIP
           recipient using an action rule despite the recipient is removed in
           the Recipent configuration.

           To prevent this, one must remove the recipient from the action rule
           too.

5.65.0:L06 When changing IP address, the Call service will restart itself to
           keep itself up to date with addresses. Call management and VoIP web
           pages will therefore experience a delay.

           We recommend waiting 30 seconds before calling and checking the VoIP
           web.

5.65.0:L07 When a Swedish language file is uploaded, the swedish flag is missing
           in the UI.

5.65.0:L08 SMTP does not sen e-mail notifications when Critical- och Warning
           messages are printed in the system log.

5.65.0:L09 The A8004-VE does not play any hold music and any defects heard from
           such music originate from the third party client.

5.65.0:L10 Terminating a VMS call will not close any streams nor update the
           current call state.

5.65.0:L11 Multiple simultaneous SIP calls are not supported at this time.

5.65.0:L12 Proxy server digest autentication does not work

5.65.0:L13 For the Java Applet viewing to work with Java 7 update 51 and later
           add the camera URL to the exception list as per:
           http://www.java.com/en/download/help/java_blocked.xml