SOFTWARE RELEASE NOTES
					======================

Application:		AXIS License Plate Verifier

Release date:		2019-12-20

Release type:		Production	      

Software version:	1.5.4	  

File name:		Licenseplateverfier_1_5_4.eap			         

Preceding Release:		 
-------------------------------------------------------------------------------

Contact Information
===================

Please contact Axis Communications for product information, updates and support
at http://www.axis.com.

-------------------------------------------------------------------------------

Compatible products
===================
See complete list of compatible products at www.axis.com.
* From verison 1.4.0 AXIS License Plate Verifier will no longer support camera models P1435-LE, Q1765-LE and P3225-LE.  For these camera models you should use version 1.2.0 or eriler verisons.

New Features in 1.5.4 since 1.5.2
===================================
* Added HTTPS for AXIS License Plate Verifier.  The function is activated under Settings>Advanced>Security.
	-HTTPS will be available between AXIS License Plate Verifier and controller (A1001) / Relay Module (A91xx).
	-HTTPS will be available for "Push events" (HTTP POST only).

Corrections in 1.5.4 since 1.5.2
==================================
C01: Fixed an issue with Granted/Accepted status on the AXIS License Plate Verifier interface.
C02: Fixed an issue with license plate detection when "Push events" is enabled and the network is not stable.
C03: Fixed an issue with credentials when the HTTP port on the camera has changed from default 80.

Upload instructions
===================

In the supported product's web interface, go to the Applications menu and upload this application package. 
Start and configure the application.
For more instructions see the User Manual at www.axis.com.

Dependencies
============
To install and configure AXIS License Plate Verifier, you must use a supported browser.

Known Bugs/Limitations
================================
K01: If you move the region of interest more than 60º or if you place it outside the live view, it will automatically jump back to default position. Make sure the region of interest stays in position after you have saved the settings.

Supported Firmware
======================
9.50.1 or earlier versions.