RELEASE NOTES
                    =============

Application:       Remote PTZ Connection Setup

Release date:      2023-12-21

Release type:      Production

Software version:  1.2.0

Preceding Release: 1.1.4

--------------------------------------------------------------------------------

Contact Information
===================
Please contact Axis Communications for product information, updates and support
at www.axis.com

--------------------------------------------------------------------------------

Compatible Products
===================
P3807-PVE, Q3819-PVE, P3818-PVE, P3827-PVE


Installation Instructions
=========================
Using the device interface, the application can be installed from "Apps" ->
"Add app" -> "Browse" and select file -> "Install" the application.

Using the legacy device interface, open up "Settings" -> "Apps" ->
"Add" -> "Browse" and select file -> "Install" the application.


New features and fixes in 1.2.0
================================
Added support for P3827-PVE panoramic camera.
New web interface.


Dependencies
============
Positioning Calibration ACAP needs to be installed to calibrate the panoramic
camera and the external PTZ camera.


Known Bugs/Limitations
======================
AXIS OS versions preceding 11.4 will have long startup time (~8min) to access
legacy device interface/device interface web page if a remote PTZ camera is
setup but cannot be reached. From AXIS OS version 11.4 and forward this startup
time will decrease to about 2min.

View areas cannot be used in One Click PTZ Control mode. Before you activate,
make sure there is only one view area available and reset it to the default
values. View area settings are disabled while one-click PTZ control is active.


Application Information
=======================
Remote PTZ Connection Setup is used to setup the connection to the remote PTZ
camera for the One Click PTZ Control functionality.

Using the device interface, the application can be started and opened from
"Apps".

Using the legacy device interface, the application can be started by opening
"Settings" -> "System" -> "One click PTZ control" and follow the instructions
there.