NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS 560 v2

 Release date:      Nov 4, 2005

 Release type:      PRODUCTION

 Software version:  7.06

 File size:         988 180 bytes 

 Last preceding
 release:           7.00


---------------------------------------------------------------------


 Contact Information
 ====================

 Please contact Axis Communications for product information, updates 
 and support at:

 http://www.axis.com


---------------------------------------------------------------------


 Added features in version 7.06
 ================================

 - A new parallel port speed mode, ECP, has been added. This should be used
   with printers that support ECP but not PJL.

 - A Robots.txt file has been added to the built-in web server to avoid being
   indexed by search engines.


 Corrected problems in version 7.06
 ==================================

 - The NPS no longer ends up in a non recoverable endless loop if it receives
   the slp-directory-agent option from the DHCP server, and an SLP DA is is
   present on the net.

 - The NPS no longer keeps rebooting for ever if it receives a NDS tree name
   via dhcp and the new name differs from the one stored in the print server.

 - When upgrading NPS's connected directly to a Cisco Catalyst switch with FTP,
   the client occasionally times out and terminates the upgrade operation.
   The reason is that the NPS during the upgrade process first closes and then
   re-established the Ethernet link to the switch. When the link is established
   again the switch does not forward packets to and from the NPS for
   approximately 30 secs, which makes some clients time out the operation.
   This problem has been solved. The NPS no longer terminates the link.

 - When upgrading an NPS with FTP, in some cases the upgrade would fail,
   it would get stuck before upgrading begun due to a bug in the FTP flash
   programmer code. This problem has now been solved. 

 - In some network environments the NPS could have difficulties obtaining an
   address using DHCP due to late answers from the DHCP server. The DHCP client
   in the NPS now tries for a longer period of time before giving up.

 - The NPS now sends a gratuitous ARP after boot and whenever the IP address
   changes.

 - Corrected the SNMP object 'sysDescr' so that nps560 does not pop up as a
   single port box when installed with Windows Standard TCP monitor.

 - The NPS now again supports HP Printer Installer for Unix.

 - Corrected behaviour when receiving ICMP packets sent to Ethernet multicast
   addresses. The NPS no longer replies to them unless the IP address is our 
   own, or an IP multicast address that we listen to.

 - Rendezvous is now known as Bonjour.

 - Improved handling of PJL communication with the printer. 
   * No PJL commands are sent before print jobs.
   * Status command is sent once at startup or when connecting a printer.
   * Changes in PJL parsing to handle changes in PJL command syntax.
   
 - Pagecount command is sent after the print job to make sure that we show the
   correct pagecount on the web page.

 - Corrected background color on some web pages.


 Limitations in version 7.06
 ===========================

 - Support for Checksums in Netware is not implemented.

 - Axis ThinWizard is the recommended management tool to use with this print
   server. HP WebJetadmin is neither tested nor supported with this release.

 - FW 7.00 and later are not fully compatible with TW 3.00.  The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.

 - Firmware release 7.00 and onwards only supports print servers with Axis
   brand name.