1

                         NEW SOFTWARE RELEASE           Version 1.0
                         ====================


          Product involved:           AXIS 70U

          Release date:               September 2, 2003

          Release type:               SERVICE

          Software version:           1.00.3

          File name:                  70_1_00_3.bin

          File size:                  1 486 278 bytes

          Last preceding release:     1.00

          Upgrade instructions:       See User's Manual or
                                      http://www.axis.com/techsup/
                                      document_servers/
                                      howto_upgrade_7000.htm
          ----------------------------------------------------------

          Supported devices:
 
          - For a complete list of supported devices go to:
            http://www.axis.com/techsup/document_servers/scanners70.htm
         

          Supported scanner drivers:

          - Avision 820C
	  - Avision 820C Plus
	  - Avision 830C
	  - Avision 830C Plus

	  - Canon DR-2080C

	  - Epson Expression 1680 Series
	  - Epson Perfection 1640SU 
	  - Epson Perfection 1640SU OFfice

	  - Fujitsu M3091DC
	  - Fujitsu M3092DC
	  - Fujitsu fi-4120C
	  - Fujitsu fi-4220C
	  - Fujitsu ScanPartner 15C
	  - Fujitsu Scanpartner 300C
	  - Fujitsu Scanpartner 620C

	  - HP ScanJet 7400
	  - HP ScanJet 7450
	  - HP ScanJet 7490
	  - HP ScanJet 8200C
	  - HP ScanJet 8250C
	  - HP ScanJet 8290C

	  - Kodac i50


          New features:

          - Support for national characters in LDAP          


 
          Corrected problems:
          
          - Problem with caps-lock and numlock setting via the 
            web interface fixed
	  - Improved LDAP multiple search base
	  - Corrected problems in driver for Canon DR2080C.
            Some image viewers gave inverted image. 
	  - Intensity/contrast problems in driver for 
            HP 7400C series


          Known problems: 

          - Time setting using MS NT does not work
          - Transparency adapters for any scanner is currently
            not supported.
          - For HP 7400C series max resolution used is 600 dpi
          - When a HP 7400C series scanner goes into power save mode
            it can take 90-120 seconds before the scanner start 
            after a scanning is initiated. 
          - Scanner name shown in the AXIS 70 display at power-on
            can be different from the name/model on the scanner 
            casing. This is due to regional/OEM name issues. 
          

          Recommendation:

          - As the default e-mail reply address in the AXIS 70 is
            blank it might be necessary to set it to a valid address
            to avoid mails being rejected as spam by some mail servers.


          Best Regards,
          Axis Communications